Screws and Fasteners: Difference between revisions

From GBFans.com
Jump to navigation Jump to search
(Created page with "These are the Screws and Fasteners that are believed to be used on the Proton Pack. There are different variations for particular fastener types on each of the packs. The leng...")
 
No edit summary
Line 1: Line 1:
These are the Screws and Fasteners that are believed to be used on the Proton Pack. There are different variations for particular fastener types on each of the packs. The lengths are unknown.
These are the Screws and Fasteners that are believed to be used on the Proton Pack. There are different variations for particular fastener types on each of the packs (GB1, GB2, Heroes, SemiHeros, SuperHero, and Stunt) and this is a generalized list. The lengths are unknown.
'''
The following list is a generalized list for the GB1 pack:
'''


'''Thrower:'''
6-32 socket cap head screws:
Instrument bar
Barrel lock
Bottom plate
Front gun ear
Gun knub under the brass washers


6-32 flat hex head screws:
Female V-Hook on Thrower Bracket/Gun Track
8-32 cap head screws:
Thrower Bracket/Gun Track
Screw between the side adjustment knobs
''Also correct for the bottom plate''
4-40 socket cap head screw:
Top knob
'''Proton Pack:'''
4-40 socket cap heads
2 resistors on the ion arm.
8-32 cap heads:
Booster frame (on some packs)
Screw beneath the ribbon cable hole ( on the one pack )
2 screws through the ribbon cable clamp
2 screws through the clippard valve
10-32 cap heads:
Booster frame (on some packs)
Ion Arm
1/4-20 cap head:
4 on the HGA
4 attaching the bumper (1/4 pan head Phillips on GB2 packs)
4 for attaching the shell to the mobo (1/4 pan head Phillips on GB2 packs)
8-32 slotted flat head machine screws:
2 for v-hook bracket




[[Category: Equipment]][[Category: Proton Pack]]
[[Category: Equipment]][[Category: Proton Pack]]
==References==
http://www.gbfans.com/community/viewtopic.php?f=2&t=28546

Revision as of 02:32, December 23, 2012

These are the Screws and Fasteners that are believed to be used on the Proton Pack. There are different variations for particular fastener types on each of the packs (GB1, GB2, Heroes, SemiHeros, SuperHero, and Stunt) and this is a generalized list. The lengths are unknown. The following list is a generalized list for the GB1 pack:

Thrower: 6-32 socket cap head screws: Instrument bar Barrel lock Bottom plate Front gun ear Gun knub under the brass washers

6-32 flat hex head screws: Female V-Hook on Thrower Bracket/Gun Track

8-32 cap head screws: Thrower Bracket/Gun Track Screw between the side adjustment knobs Also correct for the bottom plate

4-40 socket cap head screw: Top knob


Proton Pack:

4-40 socket cap heads 2 resistors on the ion arm.

8-32 cap heads:

Booster frame (on some packs) Screw beneath the ribbon cable hole ( on the one pack ) 2 screws through the ribbon cable clamp 2 screws through the clippard valve

10-32 cap heads:

Booster frame (on some packs) Ion Arm

1/4-20 cap head:

4 on the HGA 4 attaching the bumper (1/4 pan head Phillips on GB2 packs) 4 for attaching the shell to the mobo (1/4 pan head Phillips on GB2 packs)

8-32 slotted flat head machine screws: 2 for v-hook bracket

==References==

http://www.gbfans.com/community/viewtopic.php?f=2&t=28546