In terms of what all your parts are so you can align them to the diagram I posted earlier:
A: Proton pack shell (mounted to aluminium motherboard)
B: Hydrogen Gas Actuator (HGA)
C: Beam Line
D: Filler tube
E: Injector Tubes
F: Proton wand clear tube
G: Clippard Valve (wand or pack, interchangeable)
H: Ion arm resistor
I: Clippard Valve (wand or pack, interchangeable)
J: Unsure - might be knob for top of Clippard valve (part I), but could do with a better photo
K: Booster tube plug (goes in the top of part X, booster tube)
L: Crank Knob (attaches to crank generator on shell)
M: PPD
N: Unsure what this is, need a better photo please
O: Shock Mount
P: Ion Arm Resistor
Q: Proton wand front grip rear ear
R: Proton wand front grip front ear
S: Proton wand rear cylinder
T: Proton Wand front cylinder
U: Bumper
V: Booster ladder
W: Ribbon cable
X: Booster tube
Y: V-hook - left part attaches to the shell, right part attaches to part 16
Z: Proton wand instrument bar
1: Proton wand instrument bar cover
2: Proton wand trigger box
3: Proton wand trigger box cover
4: Pack and wand tubing/loom
5: Wand to pack loom/vac hose loom
6: Powercell lens (blue) and cyclotron lenses (red)
7: Proton wand body
8: Proton wand body base
9/10: Proton wand handles
11: Vac hose
12: Proton wand heatsink
13: Proton wand front handle grip
14: Proton wand rear handle grip
15: Proton wand gun track discs (attach to part 16)
16: Proton wand gun track
17: Ion arm resistor
18: Ribbon cable clamp
19: Ion arm
20: Proton wand trigger tip (goes over end of part F)
21: Proton wand top knob
22/23: Proton wand side discs
24: Proton wand clear tube adapter (connects part F to part 9 or 10)
25: Proton wand front knob
26: Proton wand large side knob
27: Proton wand banjos (attach to 20 and R, with smaller diameter red tubing between them)
28: Proton wand small side disc
Missing pack items:
x1 Ribbon cable p-clamp (you should be able to get this at a hardware store)
x3 Legris elbows (could 3D print, or buy full size from
gbfans store, or maybe on etsy, or ask Benofkent if he does them)
x2 Legris straights (could 3D print, or buy full size from
gbfans store, or maybe on etsy, or ask Benofkent if he does them)
x3 Clippard elbows (could 3D print, or just buy full size from somewhere like the
gbfans store, or maybe on etsy, or ask Benofkent if he does them)
Labels (recommend
Moby Sign Co's Spirit labels - should be about the right scale)
Hardware - bolts etc (
this thread covers all the cosmetic ones, just scale down one size in most cases. You'll need others for attaching parts too)
Electronics, inc. battery
ALICE frame, inc. straps
ALICE frame to motherboard spacers
Missing wand items:
x2 Clippard hose barbs (available from
gbfans store or maybe etsy)
Electronics (most kits come with pack and wand)
Hatlight lenses (x2 milky white, x1 orange,
gbfans sell them, or you could get 3D printed ones, or ask Benofkent if he does them)
Arcoelectric or Cliplite lenses (x1 red, x1 clear,
gbfans sell them, or you might be able to get 3D printed ones, or ask Benofkent if he does them)
Labels (recommend
Moby Sign Co's Spirit labels - should be about the right scale)
Hardware - bolts etc (
this thread covers all the cosmetic ones, just scale down one size in most cases. You'll need others for attaching parts too)
I think that is everything I can think of for now! How soon are you trying to get this together?