This is for other Ghostbusters Props that don't fit into the categories above.
By lustreking
#4956775
I just finished this and am pretty happy with it.

Image

Image

Image

There are a lot of choices for 3d printed gizmos, but I chose this one
https://www.thingiverse.com/thing:4860734

This one has raised circuit paths that are easy to paint, as was as other fake components such and the capacitors, resistors and transistors. The vertical resistors have holes in them so I glued bent pieces of wire into them. Nixie tubes are made from plastic test tubes, and I found a small string of AA powered red led lights with red wire that go in each one. This looked like an led in the tube so I cut some pieces of perfboard and shoved them in the tubes above the leds.

For the $15 or so I have invested in it, I'm very happy
User avatar
By gman666
#4964250
Thanks. I alread y have them downloaded but did not know if they had to be scaled or worked as is.

Thanks!

Greg
tobycj liked this

    I don't remember exactly, But I think I've had pr[…]

    Someone ID'd them on Facebook first, there w[…]

    Two specific ideas I have are basically holiday sp[…]

    While waiting impatiently for Frozen Empire to rel[…]