GBFans.com

I'm building the Charlesworth Dynamics ghost trap. The resistor doesn't line up to the holes. At first I thought it was the wrong size. Charles mentioned that the GB1 version needs to be filed down. As I don't have a machine shop in my apartment and only a dremel. I was wondering what I could do? Thanks.

This post may contain an affiliate link that helps support GBFans.com when you make a purchase at no additional cost to you.

A basic hand file will get it done in a swift minute , you don't need anything special.

For anyone building a prop replica or doing basic modeling work I'd highly recommend at least a simple needle file set similar to this;
https://www.amazon.com/SE-73810DF-10-Pi ... ER&sr=8-31

And something more complete like this would be better;
https://www.amazon.com/dp/B07P6T1XGR/re ... ax_0?psc=1

Prologic is right.
You could file it on a cement sidewalk if you wanted to.

Thank you! Bought myself a filing kit.