Page 2 of 2
Re: My Proton Pack Rebuild
Posted: January 26th, 2021, 9:54 am
by Peet
tobycj wrote: ↑January 26th, 2021, 9:34 am Just strip out the bulb in there and use the one with your light kit, basically just use it as a lens
That's make lens! Errr I mean sens :-p Thanks again!
Re: My Proton Pack Rebuild
Posted: January 28th, 2021, 11:29 am
by Peet
Re: My Proton Pack Rebuild
Posted: February 2nd, 2021, 11:16 am
by Peet
Hello hello,
today another little update:
-Nice Military Oliv green Tape arrived today (it looks brown on the picture, it must be the light in my room... It has a very nice olivgreen color)
-AUX Input females for AUX Mod on the Spenglers Wand arrvied today too
-Printed some Labels today on Vinylfoil and plotted them out
Also I started to mod my Spenglers Wand, I'll post the final results because it's a lot of work an I don't want to take a picture from every step haha
Stay tuned and healthy!
Re: My Proton Pack Rebuild
Posted: February 18th, 2021, 11:00 am
by Peet
Hello folks,
a lot of time has passed, but I was busy with work... SORRY!
Now a little Update:
-My first package from GBFANS.com finally arrived! I LOVE THAT PIN!!!
-I modified a few things on my Spenglers Neutrona Wand: smaller black intensify button, LED caps and the orange "thing" changed, leds re-soldered (still in work) and make the coolings fins more used look and cut out the transparent plastik.
New updates soon!
Re: My Proton Pack Rebuild
Posted: March 4th, 2021, 11:15 am
by Peet
Hello guys...
i finally managed to remove the shell ...
What can I say ... it's a big fat mess ...
Hot glue was apparently his best friend ... he just fixed everything with it ... but just take a look for yourself.
Also, I think the whole shell was 3d printed. Take a look at the last two pictures ...
A big cleanup awaits.
I will contact you with the result.
Stay safe, Peet.
Re: My Proton Pack Rebuild
Posted: March 4th, 2021, 12:13 pm
by Kingpin
Yikes.
Re: My Proton Pack Rebuild
Posted: March 7th, 2021, 2:14 pm
by Peet
Hello guys,
just a small update:
- I found a printing house for the waterslide decals and they printed me some of the circuit diagram decals from the N-Filter
- My Dad helped me the Ion Arm brass rods to round their heads
- I started to repaint my Neutrona Wand but of course is not finished yet and I also replaced some nobs and I rounded the corners from the cooling fins on the side of the Wand
Thanks for your time
Greetz Peet
Re: My Proton Pack Rebuild
Posted: March 8th, 2021, 2:49 pm
by Peet
Hello guys,
just a little update
I'm very proud of it.
Greetz Peet
Re: My Proton Pack Rebuild
Posted: June 14th, 2021, 1:15 am
by Peet
Hello Guys,
please excuse the long wait. I had a lot to worry about and a move behind me and could hardly work on the pack.
the pack was created entirely with the 3d printer. I had a lot of holes to plug and fill and repair.
But I am convinced that the result will be good
I will paint soon and then there will be new photos!
My Spengler Neutrona Wand is going to be really good too
Comparison pictures of the original condition and now coming too!
Best wishes