Made a fair amount of progress;
Attached the rear handle pending epoxy weld,
Attached instrument bar cover,
Attached rear cylinder and barbs
Attached top knob and side knob,
Attached clippard
Drilled out holes for green lever, hat lights, switches, vent, arco lights, front knob, trigger box,
Drilled and tapped the 2 screws with brass spacers to attach the front handle.
Drilled and tapped the base plate holes , plus attached v hook and s hook
Rounded the heatsink fins for giggles.
Still need to mount the trigger box, which I'm waiting for some 6/32 bolts for and I need to dremel out a part of the inner wall to allow the front knob bolt to sit straight.
Plus grips need attaching; the front one of which needs a channel dremeled out to fit over TC's new handle which has a raised channel on the outside of the handle for wires to be routed through under the grip.
And once again waiting for a few more parts and electronics to be delivered to finish the dry fit of the wand, plus I need the acrylic barrel to sort out the pop mech tube and set up the catch and lever.