thank you Spengler ,here how that was looking on the car biffore the retoration .
Martin
- April 20th, 2012, 8:59 am#387672
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- April 22nd, 2012, 2:58 pm#388006
This is beyond amazing work, and it's not even on a car yet! Keep it up!
Because you asked, more of me: http://www.megatoothpastemammals.com
- April 22nd, 2012, 4:39 pm#388015
Sent from my ADR6400L using Ghostbusters Fans on Android
drcaron wrote:Here pictures of my ecto 1 rack build
I use 1" tubing .
The base plate is 18 gadge for the siren,strobe and the propolaray plate Is not accurate but I was preffer to heve it match to the siren plate and is also more stronger ,
the radome suport this was not easy to weld but I make it
Martin
Sent from my ADR6400L using Ghostbusters Fans on Android
- April 22nd, 2012, 7:40 pm#388038
"Why worry? Each one of us is carrying an unlicensed nuclear accelerator on his back."
Is that reflective tape on the radome? I always assumed it was flat red.
"Why worry? Each one of us is carrying an unlicensed nuclear accelerator on his back."
- April 23rd, 2012, 7:04 am#388088
(I do not tape on it )
I put refletive band to see how he will look and I realise that on picture and I hate it ,so I will change to flat red as he should be .
Martin
RichLather wrote:Is that reflective tape on the radome? I always assumed it was flat red.Good yses
(I do not tape on it )
I put refletive band to see how he will look and I realise that on picture and I hate it ,so I will change to flat red as he should be .
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- May 8th, 2012, 1:15 pm#390085
I do find a heat sink from a cb base tha look almost the same but I will need to do little modifed on it bifore I peint it black ,here how he look on the rack .
As you can see I have the two diferent oxigen bottle and regulator here the A-6 bottle
and my A-13 regulator for my other bottle
Martin
As you can see I have the two diferent oxigen bottle and regulator here the A-6 bottle
and my A-13 regulator for my other bottle
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- June 5th, 2012, 6:10 am#393800
Here some new parts the polynoid ,thank to Loren for this parts .
The power suply Whelen for the strobes that go in the engine bay .
Martin
The power suply Whelen for the strobes that go in the engine bay .
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- June 8th, 2012, 9:09 am#394253
CLICK THE ABOVE BANNER TO BUY HIGH QUALITY PROP PARTS!
FEEDBACK.....http://www.gbfans.com/community/viewtop ... =32&t=5689
AMAZING!!!!
CLICK THE ABOVE BANNER TO BUY HIGH QUALITY PROP PARTS!
FEEDBACK.....http://www.gbfans.com/community/viewtop ... =32&t=5689
- August 9th, 2012, 7:17 am#406136
Thank you all .
Well I cant find a 12" fane so I use a 16" and made a 12" fane out of it I just cut since the center is the same for those litle fan it was easy to made .
Here some pictures
Martin
Well I cant find a 12" fane so I use a 16" and made a 12" fane out of it I just cut since the center is the same for those litle fan it was easy to made .
Here some pictures
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- August 16th, 2012, 12:32 am#407247
Gads! Details supreme! And this is just the tip of the TITANIC still yet! Nothing screams HARDCORE than a well planned, well dedicated, well detailed Ecto EQ build! From scratch, fabrications, totally hand-made, "I got tha chops" craftmanship, not a total "online parts made from someone else" job... no doubt! Puts my thoughts to shame on what I thought as "I got the details down pat and I'm set in what I'm doing... ERRK! Nope, I don't!"
Aye! Another Ecto hero to worship!
Go, drcaron!
Aye! Another Ecto hero to worship!
Go, drcaron!
"Viggie, Viggie! You've been a bad Monkey!"
- August 22nd, 2012, 6:53 am#408374
Thank you odiemodie I try to do my best to share it with fans that wante to made a accurate ecto-1 equipment I made step by step on how to made those props or identifed the equipment parts .
Martin
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- August 22nd, 2012, 3:55 pm#408440
Superb work brother!! Keepin' an eye on this build for sure.
Tomorrow is not promised to anyone...
- August 27th, 2012, 11:00 pm#409263
very nice eq rack you are building there. sure does put mine to shame. keep up the fantastic work.
- August 30th, 2012, 6:07 am#409672
Thank you all for the reply ,I will show you more pictures but now i am try to complited my proton pack rack ,I wont made accuracy cause I wante it more stronger for holding the proton pack safety .
here my prototype for the bottom holding bracket ,this way it wont move on side
Martin
here my prototype for the bottom holding bracket ,this way it wont move on side
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- August 30th, 2012, 7:15 am#409677
- September 12th, 2012, 2:07 pm#412142
Here how is look I made them with 3/4 plywood and steel cap the front ,like this the proton pak will be safe from moving side to side .
]
]
Kingpin liked this
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- February 4th, 2013, 9:40 am#433382
I chose to dont have the accurate louver on the car I prefer to have some Hotrod louver style just to be a litle different ,here picture of my Freind Daniel Lauzon make thoses for me in is shop .
Martin
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- February 5th, 2013, 12:06 am#433554
how much did it run you? i think i got over charged. Ps how are you attaching them?
GBFANS TRIBUTE PACK http://www.gbfans.com/community/viewtop ... =4&t=21799 & GAME SUITS
RGB PACK http://www.gbfans.com/community/viewtop ... 75&start=0
ECTO CAVE- http://www.gbfans.com/community/viewtop ... =7&t=17029
RGB FRIGHT PETER - http://www.gbfans.com/community/viewtop ... 49&p=33249
NYGB ECTO- http://www.gbfans.com/community/viewtop ... 13&t=31073
RGBGUY
RGB PACK http://www.gbfans.com/community/viewtop ... 75&start=0
ECTO CAVE- http://www.gbfans.com/community/viewtop ... =7&t=17029
RGB FRIGHT PETER - http://www.gbfans.com/community/viewtop ... 49&p=33249
NYGB ECTO- http://www.gbfans.com/community/viewtop ... 13&t=31073
RGBGUY
- February 5th, 2013, 3:02 pm#433615
You're probably right to do that hot rod louver. The ones made from thinner household venting tend to bend with the slightest pressure. ( Touch, the wind, etc. ) What you have there looks much more stable.
- February 6th, 2013, 6:12 am#433699
I was not thinking about this but now that you tel me I am happy to have chose to put those louver I was wante to put a persssonel tuch on the car since I love hotrod .
Bryan soon you will see a new 1959 Superior ecto-1 after I could relaxing and take the time to finish my 1959 Meller Meteor .
XxEctOxX i dont pay for those louver Daniel give it to me ,but he charged 3 by louver plus the metal ,I dont have the exacte place were I goin to put it I am waiting for some mesurment from Loren ,I think to glue them with car stritural body glue 3m .
Martin
Bryan soon you will see a new 1959 Superior ecto-1 after I could relaxing and take the time to finish my 1959 Meller Meteor .
XxEctOxX i dont pay for those louver Daniel give it to me ,but he charged 3 by louver plus the metal ,I dont have the exacte place were I goin to put it I am waiting for some mesurment from Loren ,I think to glue them with car stritural body glue 3m .
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- February 6th, 2013, 7:41 pm#433792
I have gifted you the measurements via PM Martin!
Owner of The Ect-OHIO
- February 7th, 2013, 5:57 am#433835
Thank you for your coment I try to do my best with the small free time I got but this is the years that I will have a ecto-1 in the next summer .
Merci for the measurements Loren
Martin
Merci for the measurements Loren
Martin
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
- September 30th, 2013, 3:08 pm#461497
Ecto 1 pictures , prop's and parts link
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
https://www.facebook.com/ecto1canada
www.lescreationscyclone.com
www.pbase.com/drcaronproplab
www.pbase.com/sfmghostbusters
Did it come out today? Ugh the art is so bad tho[…]