- September 1st, 2018, 6:59 pm#4908118
While I'm pretty happy with these as is, I'd like to give it a once-over and give it a better looking paint treatment. I have removed the rivet looking parts from the side panels of the goggle by just pulling them out. I intend on replacing the hex bolts with real ones and replacing the bolts around the face mask area with big rivets.
I'm a little hesitant to simply pull things apart or off in case they become damaged. Any advice or help would be appreciated.
I'm a little hesitant to simply pull things apart or off in case they become damaged. Any advice or help would be appreciated.