Ghostbusters Fans Mobile

- Movies
- Cartoons
- Games
- Publications
- Equipment
- Toys
- Shop
- Fans
- Community



Home > Shop > Proton Pack Parts

Frequently Asked Questions - Proton Pack Parts

Get a Discount in February between 5-25% Off! Purchase a Supporting Membership to Save!

Here at the Ghostbusters Fans we are dedicated to providing you with genuine parts for your Ghostbusters Props. We keep our items in stock and have them ready to ship after you place your order. We accept payments via credit card: Visa, Mastercard, Discover, American Express. Please note, there are limited quantities available of each part. Even though we may have several instock, you may only be able to purchase a select amount.

Want to be kept up to date about restocks and new items? Join the Ghostbusters Fans Shop Mailing List!

Proton Pack: 1/4" Split Wire Loom

You will recieve 2 feet of this 1/4" split wire loom covering. Enough for the coverings on a single Proton Pack.

$2.50

In Stock!
Quantity:   
Proton Pack: 1/4

Proton Pack: 3/4" Splitless Wire Loom

You will recieve 6 feet of this 3/4" splitless wire loom covering. That's right... there is no annoying split! Enough for the average Proton Pack!

$8.00

In Stock!
Quantity:   
Proton Pack: 3/4

Proton Pack: ALICE Pack Frame

This is a brand new LC-1 pack frame with olive drab straps and kidney belt. Perfect for your Proton Pack build!

$35.00

Get notified when its back in stock!Out of Stock!
Proton Pack: ALICE Pack Frame

Proton Pack: Arcolectric Clear Neon Indicator

These are Arcolectric clear neon indicator lamps. They are very close to the real things used on the Proton Gun. If wiring up, understand these are neon gas require a 250 volt supply!

$8.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Arcolectric Clear Neon Indicator

Proton Pack: Arcolectric Red Incandescent Indicator

These are Arcolectric red incandescent indicator lamps. They are very close to the real things used on the Proton Gun. If wiring up, understand these require a 28 volt supply. Also for use on the Ghost Trap pedal!

$8.00

In Stock!
Quantity:   
Proton Pack: Arcolectric Red Incandescent Indicator

Proton Pack: Blue Power Cell Lens

This is the Blue Power Cell Lens made of translucent acrylic. The dimensions are 3/4" x 4-1/2" (oversized to fit into power cell).

$5.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Blue Power Cell Lens

Proton Pack: Clippard Brass Elbow

This is brass elbow that is used in three places on the Proton Pack. You will be getting both peices, no need to buy them seperately. Sold Individually. You need 3 of these for each Proton Pack.

$4.00

In Stock!
Quantity:   
Proton Pack: Clippard Brass Elbow

Proton Pack: Clippard Brass Elbow (GB1 Ion Arm)

This is brass elbow that is used on the Ion Arm of the Ghostbusters 1 Proton Pack. These are sold individually and only one is required per Proton Pack.

$4.00

In Stock!
Quantity:   
Proton Pack: Clippard Brass Elbow (GB1 Ion Arm)

Proton Pack: Clippard Hose Barb

The Clippard Hose Barb is used on the Proton Gun to go with the green tubing You need two of these for each Proton Gun.

$2.50

In Stock!
Quantity:   
Proton Pack: Clippard Hose Barb

Proton Pack: Clippard R-331

This is a genuine and functioning Clippard R-331, as found on the Ghostbusters Proton Proton Pack.

$35.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Clippard R-331

Proton Pack: Clippard R-701

This is a genuine and functioning Clippard R-701, as found on the Ghostbusters Proton Gun.

$30.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Clippard R-701

Proton Pack: Dale PH-25 Resistor

The PH-25 is the rare round resistor that is on the Ion Arm of the Proton Pack in both movies. It is a 25 watt resistor made by Dale in the early 1980's. The real deal!

$8.00

In Stock!
Quantity:   
Proton Pack: Dale PH-25 Resistor

Proton Pack: Dale RH-50 Resistor

The RH-50 is the longer resistor on the Ion Arm. It is the one with the blue tubing coming out of it and running to the PPD and Clippard Brass Elbow. These are the correct ones used on the Proton Pack with the Dale logo and solder lugs!

$6.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Dale RH-50 Resistor

Proton Pack: Dale SPR-8 Resistor

The Dale SPR-8 resistor is a replacement for the RH-50 on the Ion Arm. They are identical to the RH-50, except they have a screw thread instead of solder lugs. The blue tubing fits over the threads and is held in place perfectly! Highly recommended over the RH-50.

$7.50

Get notified when its back in stock!Out of Stock!
Proton Pack: Dale SPR-8 Resistor

Proton Pack: Dixie Cup Bracket

These are a perfect alternative to more expensive Proton Gun holsters. Also works for Ghost Traps!

$6.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Dixie Cup Bracket

Proton Pack: Ghostbusters Ribbon Cable

This is a replica Ghostbusters 1 style ribbon cable made using professional cable lamination equipment. The wires are the correct 16AWG gauge wires and are encased in a PVC lamination jacket. Each cable is 24" and is pre-cut to this length.

Note: This is a pre-order, the cables are expected to be in stock by March 15th, 2012. Though this is only an estimate, and it is subject to change.

$35.00 - Pre-Order!

Expected Ship Date: March 15, 2012
Quantity:   
Proton Pack: Ghostbusters Ribbon Cable

Proton Pack: Grey Crank Knobs

These are brand new MIL-SPEC MS91528 Crank Knobs. They are made to the same specifications as they have been for the last few decades. These are authentic grey plastic, injection molded knobs identical to the originals used on the Proton Packs in Ghostbusters (right down to the same part number!). Includes set screws, to fit on to 1/4" shaft or potentiometer.

$30.00

In Stock!
Quantity:   
Proton Pack: Grey Crank Knobs

Proton Pack: Hat Light Socket Base

The original Proton Pack "hat" lights have been found and sourced from the original manufacturer. We have bought a large stock for Ghostbusters Fans to have only the best quality parts. These are the socket bases for the "hat" lights used on the Proton Pack. These are for the total accuracy nut. You will need two for an accurate Proton Pack.

$12.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Hat Light Socket Base

Proton Pack: Ion Arm Assembly (GB1)

This is an all metal Ion Arm peice that includes knurled brass rods, two socket head cap screws and a Clippard L-Fitting.

$40.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Ion Arm Assembly (GB1)

Proton Pack: Ion Arm Assembly (GB2)

This is an all metal Ion Arm peice that includes knurled brass rods, and two socket head cap screws.

$30.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Ion Arm Assembly (GB2)

Proton Pack: LED Cliplites (Red & Clear)

These go on the Proton Gun over the leds as a substitute for Arcolectric Lights and Hat Lights. You will be getting a set of two of each color (4 total).

$2.50

In Stock!
Quantity:   
Proton Pack: LED Cliplites (Red & Clear)

Proton Pack: Legris Straight Fitting

These are vintage Legris Straight Fittings that are visually identical to the ones used on the Proton Packs. However, these fittings are for 5mm tubing, instead of the standard 4mm tubing. All other dimensions are exactly the same! Just glue your tubing in, or install an adapter and no one will know the difference.

$8.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Legris Straight Fitting

Proton Pack: Orange Hat Light Lens

The original Proton Pack "hat" lights have been found and sourced from the original manufacturer. We have bought a large stock for Ghostbusters Fans to have only the best quality parts. These are the orange / amber lenses that are used on the pack. For extra accuracy, also check out the socket bases that these screw into! You will need one lens and one socket base for an accurate Proton Pack.

$8.00

In Stock!
Quantity:   
Proton Pack: Orange Hat Light Lens

Proton Pack: Proton Gun Aluminum Heatsink

We've got them! These are aluminum heatsinks for the Proton Gun that are custom machined to recreate the original heatsinks. Features the wavy fin profile and pre-drilled holes for easy attachment to your Proton Gun!

$50.00

In Stock! Limited Supply! Order Soon!
Quantity:   
Proton Pack: Proton Gun Aluminum Heatsink

Proton Pack: Proton Gun Aluminum Trigger Tip

These are fairly accurate aluminum trigger tip assemblies which have been welded with a hole drilled and tapped for the Banjo fitting (sold seperately). These also come with a set screw to secure to an acrylic tube.

Some clean up may be required with a piece of sand paper to clean up

$25.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Proton Gun Aluminum Trigger Tip

Proton Pack: Red Cyclotron Lenses

This is the Red Cyclotron Lens made of translucent acrylic. It is just under 2" square. You need four for a single Proton Pack.

$3.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Red Cyclotron Lenses

Proton Pack: Resin Clippard R-331 Valve

A replica resin Clippard R-331 valve that goes on the Proton Pack.

Our resin replica parts replace the hard to find and expensive parts with an inexpensive alternative. The resin parts we sell are of a very high quality and are mostly free of bubbles, but will require cleanup and some sanding.

$10.00

In Stock!
Quantity:   
Proton Pack: Resin Clippard R-331 Valve

Proton Pack: Resin Clippard R-701 Valve

A replica resin Clippard R-701 valve that goes on the Proton Gun.

Our resin replica parts replace the hard to find and expensive parts with an inexpensive alternative. The resin parts we sell are of a very high quality and are mostly free of bubbles, but will require cleanup and some sanding.

$10.00

In Stock!
Quantity:   
Proton Pack: Resin Clippard R-701 Valve

Proton Pack: Resin Crank Knob

A resin crank knob for the crank generator on your Proton Pack.

Our resin replica parts replace the hard to find and expensive parts with an inexpensive alternative. The resin parts we sell are of a very high quality and are mostly free of bubbles, but will require cleanup and some sanding.

$6.00

In Stock! Limited Supply! Order Soon!
Quantity:   
Proton Pack: Resin Crank Knob

Proton Pack: Resin Ladder / Booster Frame

A very accurate resin replica Booster or Ladder Frame. Made using the exact same parts as the original.

Our resin replica parts replace the hard to find and expensive parts with an inexpensive alternative. The resin parts we sell are of a very high quality and are mostly free of bubbles, but will require cleanup and some sanding.

$12.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Resin Ladder / Booster Frame

Proton Pack: Ribbon Cable

This is the Ghostbusters 2 style ribbon cable. It is the correct 60 conductor ribbon cable with a common tan line.

You will get roughly 30" (enough for one Proton Pack) for each order.

$10.00

Get notified when its back in stock!Out of Stock!
Proton Pack: Ribbon Cable

Proton Pack: Ribbon Cable Aluminum Hold Down

These are laser cut aluminum ribbon cable hold downs for your Proton Pack, includes an upper and lower plate as well as two screws.

$15.00

In Stock!
Quantity:   
Proton Pack: Ribbon Cable Aluminum Hold Down

Proton Pack: Ribbon Cable Clamp

The correct insulated cable clamp for use with the Ribbon Cable on the Proton Pack. These are the real deal!

$3.00

In Stock!
Quantity:   
Proton Pack: Ribbon Cable Clamp

Proton Pack: Sage Resistor

This is the correct smaller resistor on the Ion Arm of the Proton Pack in both movies.

$5.00

In Stock!
Quantity:   
Proton Pack: Sage Resistor

Proton Pack: Vinyl Clippard Labels

These are amazing reproduction vinyl labels for your resin Clippard valves. They are made from black semi-gloss vinyl that has been thermally imprinted with chrome foil. Included is a R-331 and R-701 label with each set. Artwork by namebrand.

$6.00

In Stock! Limited Supply! Order Soon!
Quantity:   
Proton Pack: Vinyl Clippard Labels

Proton Pack: White Hat Light Lens

The original Proton Pack "hat" lights have been found and sourced from the original manufacturer. We have bought a large stock for Ghostbusters Fans to have only the best quality parts. These are the white lenses that are used on the pack. For extra accuracy, also check out the socket bases that these screw into! You will need two white lenses and one socket base for an accurate Proton Pack.

$8.00

In Stock!
Quantity:   
Proton Pack: White Hat Light Lens

SMC 4mm Elbow Fitting

This is a fitting that is similar to the fittings used on the Proton Pack (Legris Fitting), these however are a modern day replacement and are made by SMC. The size is 4mm (which is accurate), but they also fit 5/32" tubing. You need three for each Proton Pack.

$6.00

In Stock!
Quantity:   
SMC 4mm Elbow Fitting

Tubing: Blue (1/4" OD)

You will receive 3 feet of solid blue 1/4" OD tubing (about enough for one Proton Pack).

$5.00

In Stock! Limited Supply! Order Soon!
Quantity:   
Tubing: Blue (1/4

Tubing: Green (1/4" OD)

You will receive 1 foot of this green tubing (1/4" OD) precut. Enough for several Proton Guns. This tubing is precut to lengths of 1 foot.

$2.50

In Stock!
Quantity:   
Tubing: Green (1/4

Tubing: Red (1/4" OD)

You will recieve 2 feet of solid red 1/4" OD tubing (about enough for one Proton Pack). This tubing is precut to lengths of 2 feet.

$2.50

In Stock!
Quantity:   
Tubing: Red (1/4

Tubing: Red (1/8" OD)

You will receive 3 feet of this 1/8" OD tubing. About enough for one Proton Pack. This tubing is precut to lengths of 3 feet.

$4.00

In Stock! Limited Supply! Order Soon!
Quantity:   
Tubing: Red (1/8

Tubing: Yellow (1/8" OD)

You will receive 1 foot of this yellow tubing precut, enough for one or two Proton Packs or Ghost Traps. This tubing is precut to lengths of 1 foot.

$2.50

In Stock!
Quantity:   
Tubing: Yellow (1/8


© 1998-2012 Ghostbusters Fans & Ghostbusters Prop Archive - Created and Written by AJ Quick
"Ghostbusters" and "Ghost-Design" are registered Trademarks of Columbia Pictures Industries Inc.

Back to the Normal Version of Ghostbusters Fans