- February 19th, 2018, 10:55 am#4903330
Hi all -
I hit a snag in my current project and was hoping for some community help. I'm building a custom pistol for my dark ride, and it uses a GBFans light kit. However, the bar graph is a few extra inches away from where I needed to mount the board itself, so the "flat flex cable" won't reach. I've never seen a cable like this, so I don't know where to even begin looking for a longer one with the right number of pins.
I should note I have spent some time researching, and I tent to *think* this is a 16pin flat flex cable, and I'm thinking I need something in the 4-6 inch range. I'm thinking something like this might work, but I feel like I'm guessing.
https://www.mouser.com/ProductDetail/Wu ... 0yhA%3d%3d
Anyone have any ideas?
Thanks,
Jake
I hit a snag in my current project and was hoping for some community help. I'm building a custom pistol for my dark ride, and it uses a GBFans light kit. However, the bar graph is a few extra inches away from where I needed to mount the board itself, so the "flat flex cable" won't reach. I've never seen a cable like this, so I don't know where to even begin looking for a longer one with the right number of pins.
I should note I have spent some time researching, and I tent to *think* this is a 16pin flat flex cable, and I'm thinking I need something in the 4-6 inch range. I'm thinking something like this might work, but I feel like I'm guessing.
https://www.mouser.com/ProductDetail/Wu ... 0yhA%3d%3d
Anyone have any ideas?
Thanks,
Jake
Last edited by SedgewickHotel on February 27th, 2018, 9:49 pm, edited 2 times in total.