This is for other Ghostbusters Props that don't fit into the categories above.
User avatar
By SedgewickHotel
#4903330
Hi all -

I hit a snag in my current project and was hoping for some community help. I'm building a custom pistol for my dark ride, and it uses a GBFans light kit. However, the bar graph is a few extra inches away from where I needed to mount the board itself, so the "flat flex cable" won't reach. I've never seen a cable like this, so I don't know where to even begin looking for a longer one with the right number of pins.

I should note I have spent some time researching, and I tent to *think* this is a 16pin flat flex cable, and I'm thinking I need something in the 4-6 inch range. I'm thinking something like this might work, but I feel like I'm guessing.

https://www.mouser.com/ProductDetail/Wu ... 0yhA%3d%3d

Anyone have any ideas?

Thanks,
Jake
Last edited by SedgewickHotel on February 27th, 2018, 9:49 pm, edited 2 times in total.

    Someone ID'd them on Facebook first, there w[…]

    Two specific ideas I have are basically holiday sp[…]

    While waiting impatiently for Frozen Empire to rel[…]

    Make it that pack, sell it for $599. (While I […]