Trap Pedal Work - GBFans.com

Trap Pedal Work#4907214

By necrosapien87 - July 31st, 2018, 6:06 pm

- July 31st, 2018, 6:06 pm#4907214

So, I'm working on making a trap pedal and was wondering how to attach the flex tube "spring" to the bottom of the pedal since the pedal plate is metal.

Re: Trap Pedal Work#4907224

By Kingpin - August 1st, 2018, 10:24 am

- August 1st, 2018, 10:24 am#4907224

You could glue a jar lid, or a round piece of wood or MDF, around the width of the spring, to the underside of the Trap pedal. You can either just leave a friction fit in place to secure the spring, or you could look into whether the two items could be glued, or zip-tied together.

Glenn Frederick liked this

Feeling overwhelmed by the Covid-19 pandemic? Please visit The Support Thread.

What would Ryan do?

Re: Trap Pedal Work#4907228

By Glenn Frederick - August 1st, 2018, 11:16 am

- August 1st, 2018, 11:16 am#4907228

Is the Tube Spring like the one Countspatula sells?

You could have that piece 3D printed from his files then tap and screw it on to the aluminum.

Re: Trap Pedal Work#4907249

By necrosapien87 - August 1st, 2018, 5:49 pm

- August 1st, 2018, 5:49 pm#4907249

Glenn Frederick wrote: ↑August 1st, 2018, 11:16 am Is the Tube Spring like the one Countspatula sells?

You could have that piece 3D printed from his files then tap and screw it on to the aluminum.

I was planning to use 2inch air duct hose.