[TwointheBox312]

Hey guys, I purchased the wand lights kit from the shop on here and noticed that when I hooked everything up, everything works but the vent light. Has anyone ran into this problem before, or is this just me? Any help would be awesome. The wand lights board is in the normal configuration but the 5th switch is up

[Ectotainment]

Did you try running test mode to see if the vent light will turn on?

[TwointheBox312]

Okay, this might be a stupid question but how do you run the test mode? Am I missing it in the directions?

[Ectotainment]

It's in the instructions under the Configuration Potentiometer Section #4 on pages 7-8. If you turn the potentiometer fully clockwise it will activate Test Mode.

"The Ear pushbutton will turn on the diffused White LED used as a Vent Light underneath the vent slits"

[TwointheBox312]

Okay so I ran the test and the led works, maybe it's the vent light switch then?

[Ectotainment]

Could be... you can test that in Test Mode too. If that works, it might be your dip switch settings. Just reread the document again and maybe unplug everything and plug back in. If you're still having trouble you may want to reach out to gbfans or spongeface who engineered the kit.

[TwointheBox312]

Alright, I'll try that. Thanks so much for all of your help man!