- April 11th, 2018, 8:57 am#4904947
Hi. Im running into a bit of a problem with my spirit pack.
I running wires from a SPDT toggle from the wand to the inside of my pack to my power cell and cyclotron lights so i can turn them off and on with the switch.
I have a wire from the battery pack to the first prong on the switch, Then from the second (middle) prong i had to ran to the power cell positive wire but it didn't work. Wouldn't turn on and off. I then ran the second wire from the middle prong to the negative wire thats attached to the power cell . It then would turn on and off like normal. But then i went back a few moments later and the battery pack was warm and when i opened the case the battery's were pretty hot.
Im using a power cell and cyclotron light kit from spongeface that uses the existing battery pack the spirit pack has.
Im wondering if i need to have more voltages instead of the 3 AA battery's that the pack takes.
Im hitting a wall not sure what to do. Any help would be great.
Thank you.
I running wires from a SPDT toggle from the wand to the inside of my pack to my power cell and cyclotron lights so i can turn them off and on with the switch.
I have a wire from the battery pack to the first prong on the switch, Then from the second (middle) prong i had to ran to the power cell positive wire but it didn't work. Wouldn't turn on and off. I then ran the second wire from the middle prong to the negative wire thats attached to the power cell . It then would turn on and off like normal. But then i went back a few moments later and the battery pack was warm and when i opened the case the battery's were pretty hot.
Im using a power cell and cyclotron light kit from spongeface that uses the existing battery pack the spirit pack has.
Im wondering if i need to have more voltages instead of the 3 AA battery's that the pack takes.
Im hitting a wall not sure what to do. Any help would be great.
Thank you.